About
About Moein Sherafatmand
An electrician based in Gurab Zarmikh. The work started in house wiring and grew into solar, automation and switchboards.
Moein Sherafatmand is an electrician living and working in Gurab Zarmikh, Gilan. He started in building wiring and, as demand in the area grew, extended into solar systems, home automation, CCTV and switchboard building.
The reason for that breadth is practical. In a village or a small town, a client does not want to coordinate a different person for every electrical job. Whoever wired the house is the sensible person to also understand the solar array on its roof, the door entry panel and the camera over the yard, and to install them so that they work together.
The approach rests on three things: measuring rather than guessing, following the national building regulations even when nobody is inspecting, and handing over documentation. A single-line diagram and a circuit schedule can look like paperwork on the day; five years later, when something has to change, that paper is what makes the change cheap.
Working in Gilan sets its own terms. High humidity, heavy rainfall and cold winters change both the equipment and the method: enclosure ratings, cable routes, weather sealing on outdoor intercom panels and galvanised mounting structure for solar all follow from the climate.
Alongside his own practice, Moein is a member of the Norasys (Nora System) team, installing solar, backup power and building automation across Gilan.

- 10+
- Years on the tools
- 500+
- Jobs completed
- 24
- Hour emergency response
- 18
- Towns and villages covered
Specification
The instruments the work is done with
This list is here because it is checkable: you can ask any electrician what they measure with.
- 01 Digital multimeter and clamp meter
- 02 Insulation resistance tester
- 03 Earth resistance tester for electrode measurement
- 04 RCD and phase-sequence tester
- 05 Thermal camera for finding hot spots in boards
- 06 Cable tracer and in-wall route finder
- 07 Hand tools insulated to 1000 V
- 08 Torque wrench for board terminations
Contact
Describe the job and I will take it from there
One short call is usually enough to establish what the work is, how long it takes and roughly what it costs.
Call for an accurate estimate. If I am on a job and miss the call, I ring back as soon as I am off the ladder.